1. There is an inner diameter in the evaporator φ 200mm round metal basin with height of about 100mm.
2. The sodium chloride evaporator is of metal circular structure, the inner wall shall be smooth, and the evaporator blade shall be free of burr, bruise and other defects.
3. All parts in contact with water shall be smooth, and the joints or welds of the connecting parts shall be tight and firm without water leakage.
4. The parts and components of sodium chloride evaporator shall be assembled correctly, and there shall be no looseness, deformation and other defects affecting the use.
5. The protective layer of evaporator parts and components shall be firm, uniform, smooth and free of defects such as delamination and corrosion.
6. The evaporator and the mounting bracket shall be easy to install, and the evaporator will not be disconnected due to the influence of wind during normal use.
7. Accessories: graduated measuring cup, water reservoir, mounting frame, wire mesh cover (bird proof drinking water, user optional).
